top of page

IKEA Drawer Units and Storage Cabinets Assembly

It is known that IKEA drawer dresser assembly is extremely easy. There are obvious reasons for this well-known fact: IKEA products are designed to combine functionality with ease of use. The IKEA products are cheap and they can be assembled and disassembled easily, but there are a few of them, especially drawer and dresser units which are a tough challenge for even the most skilled and the most patient of people. If you find yourself in a bind and unable to figure out an IKEA drawer assembly, here are a few tips, tricks, and tools which will make the job easier for you. Follow them and every IKEA unit will be a piece of cake for you.

1-Separate and Count Your Pieces

It is always a good idea to take inventory of all the pieces that come in the box. From screws to panels, there can be dozens of tiny and large pieces which can be easily lost. Therefore, you have to be careful not to lose them. Take your time separating every screw and every dowel. Once you have done it, the visual and graphics instructions provided by IKEA will be easy to understand and interpret. This will allow you to have a better visual clue about the task at hand. Moreover, you will be able to use the correct sized pieces at the correct places.

2-Customize and then Construct

This is an especially important step especially if you want to add a personal touch to your IKEA drawer kitchen island assembly. If you want to add a personal touch to your furniture, the best time to do that is before starting the assembly. Whether you want to give the shelves a personalized paint job, or you want to put holes in the shelves to accommodate for any wiring, the best way to do all that is by customizing it before you start assembling your furniture unit.

3-Buy an Electric Screwdriver

This is an essential step that you really should consider. If you have purchased and assembled an IKEA product before, then you should know for sure that there are lots of screws used for the construction. Without an electric screwdriver, the job will be way too big and difficult to handle. An expensive screwdriver purchased once, will help you with countless projects and tasks in the future. It is actually better to buy a low-power and cheaper screwdriver for IKEA furniture because it won’t damage the panels or the screw holes by outing too much force.

4-Buy a Rubber Mallet

This is another tool which may not be in your toolbox, but purchasing this tool will make all jobs easier. There are numerous weak points and relatively frail panels and pieces in an IKEA unit. Shelving and drawer units, in particular, could use a rubber mallet. It applies a decent amount of force, but without breaking or damaging any of the smaller pieces or the wood dowels. A rubber mallet maximizes efficiency and minimizes time spent on an IKEA unit that is why this small purchase will make a wise investment.

5-Make Space

If you are taking on the big task of assembling an IKEA drawer unit, then you should know that the piece will be bigger than what you anticipated. If you need space, but your own room is cramped, then it is best to assemble the furniture in another room, but make sure that the door to your room is large enough to allow you to shift the final product. By working in a bigger place, you are able to space out your operations and minimize hassle and errors. It will also help to make the entire project easier to organize.

6-Plan Before You Start

This is perhaps self-explanatory. If you start without completely visualizing and planning the process to the end, you will never know which way the furniture grows. In the end, there is a chance of missing some shelving pieces or, sometimes, the problem may be a lot worse than this one, previously mentioned. This allows you to calculate the space you need, the time that the whole assembly is going to take and the necessity to call for professional assistance to help you during the assembly process. Planning really helps a lot.

7-Follow Instructions Closely

IKEA drawer dresser assembly is a difficult task, that’s why IKEA offers precise and accurate instructions. If something is displayed in the instructions, there must be a reason for that. It is wise to trust and follow the instruction diagrams closely. Many times, in the assembly of a large or complicated article, mistakes made in the beginning manifest themselves towards the end of the project. By that time, it is often too late and you have to start from the very beginning.

8-Double Check

It is not wise to underestimate the challenge that assembling an IKEA article poses, nor is it wise to overestimate your own skill or the quality of your work. It is better to do the assembly once, instead of making mistakes and starting all over. Double check every new piece you attach to the structure, to make sure all bolts are tight and secure as well as every panel is in the right place. Double-checking allows you optimize your work and avoid mistakes.

Recent Posts
bottom of page